Mumbai, Maharashtra
GST No. 27BEPPP5775K1ZJ
Call 08043844804 93% Response Rate
We can offer vide range of Alloyed Steel Round Bars / Bright Steel Round Bars from ready stock or on make to order basis.
Can supply Alloyed Steel Round Bars / Bright Steel Round Bars in normalized, annealed, spherodized annealed, quenched (hardened) & tempered with black or bright finish.
Can supply Alloyed Steel Round Bars / Bright Steel Round Bars from sizes ranging between 4mm upto 600mm depending on material grades.
We stock, supply, export, wholesale Alloyed Steel Round Bars / Bright Steel Round Bars which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Dies Making, etc.
We can supply smaller quantities of Alloyed Steel Round Bars / Bright Steel Round Bars from our associated manufacturing unit for steel bars in India.
If any requirements for Alloyed Steel Round Bars / Bright Steel Round Bars do contact us.
Grade | 304 |
Length | 3 m |
Shape | Hexagonal |
Usage/Application | Construction |
Rust proof | Yes |
Finish | Bright |
Surface Treatment | Forged |
Country of Origin | Made in India |
We have gained rich industry experience in the field of supplying a huge of 304 SS HEX Bar. Available in different sizes, shapes, finishes and dimensions, all our products require less maintenance and are ideal for high temperature & pressure applications. We have made our exclusive range of these caps by making use of world-class raw materials and sophisticated technologies.
View Complete details
Grade | 316 |
Length | 6 m |
Shape | Round |
Usage/Application | Construction |
Rust proof | Yes |
Finish | Polished |
Country of Origin | Made in India |
We have gained rich industry experience in the field of supplying a huge gamut of 316 SS HEX Bar. Available in different sizes, shapes, finishes and dimensions, all our products require less maintenance and are ideal for high temperature & pressure applications. We have made our exclusive range of these caps by making use of world-class raw materials and sophisticated technologies
Key Properties:
These properties are specified for flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.
View Complete details
Thickness | 3 inch |
Grade | 304 |
Length | 6 m |
Shape | Round |
Rust Proof | Yes |
Usage/Application | Construction |
Finish | Matt Finish |
Country of Origin | Made in India |
Being the most remarkable names in the industry, we offer an extensive range of 304 Stainless Steel Round Bar that are dimensionally accurate in nature and are sturdy in nature. They are sturdy in construction and are performance based. We offer them in standard thickness and are quality assured.
Features:
View Complete details
Size | 3 inch |
Grade | 316 |
Length | 9 m |
Shape | Round |
Usage/Application | Construction |
Finish | Polished |
Country of Origin | Made in India |
View Complete details
Material | Mild Steel |
Thickness | 4 inch |
Diameter | 13 mm |
Surface Finish | Galvanized |
Single Piece Length | 6 meter |
Shape | Round |
Usage/Application | Industrial |
Corrosion Resistance | Yes |
Country of Origin | Made in India |
Naressh Steel Engg Co., Mumbai, India is engaged in Industrial supplies can offer wide range of Aluminum, Brass, Bronze Pipes, Tubes, Bars Rods from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Aluminum, Brass, Bronze Pipes Tubes as welded (erw, efw or saw) seamless (smls) with black, bright (pickled or mirror polished), aluminium finish depending on material grades.
Size Dimensions: Client can avail Aluminum, Brass, Bronze Pipes Tubes of diameter sizes ranging between 6mm upto 31.75mm for OD sizes pipes tube, ½” inch to 6” inch for NB sizes pipes tubes as welded or seamless depending on material grades technical specifications.
We stock, supply, export, wholesale Aluminum, Brass, Bronze Pipes, Tubes, Bars Rods which are used in applications of Bridges, Engineering, Construction, Oil Field, Offshore, Shipbuilding, Nuclear Projects, Marine Projects, Medical, Instrumentation, Furniture, Boiler, Heat Exchangers, University student projects, etc.
We can supply smaller quantities of Aluminum, Brass, Bronze Pipes, Tubes, Bars Rods from associated manufacturing unit in India are also looking to explore its supply to Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma, Burundi, Cambodia, Cameroon, Canada, Cabo Verde, Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Cote d'Ivoire, Croatia, Cuba, Curacao, Cyprus, Czechia, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kenya, Kiribati, South Korea, Kosovo, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Icaragua, Niger, Nigeria, Norway, Oman, Palau, Palestinian Territories, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Samoa, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Swaziland, Sweden, Switzerland, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uruguay, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe, etc.
If any requirements for Aluminum, Brass, Bronze Pipes, Tubes, Bars Rods kindly do contact us.
View Complete details
Size | 2 inch |
Steel Grade | EN 8 |
Material | Mild Steel |
Single Piece Length | 6 meter |
Usage/Application | Manufacturing |
Surface Treatment | Hot Rolled |
Hardness | 55 HRC |
Country of Origin | Made in India |
WE HAVE READY STOCK OF Grade 304 is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.
Key Properties
These properties are specified for flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.
Composition
Typical compositional ranges for grade 304 stainless steels are given in table 1.
Table 1. Composition ranges for 304 grade stainless steel
Grade | C | Mn | Si | P |
| Cr | Mo | Ni | N | |
304 | min. max. | - 0.08 | - 2.0 | - 0.75 | - 0.045 | - 0.030 | 18.0 20.0 | - | 8.0 10.5 | - 0.10 |
304L | min. max. | - 0.030 | - 2.0 | - 0.75 | - 0.045 | - 0.030 | 18.0 20.0 | - | 8.0 12.0 | - 0.10 |
304H | min. max. | 0.04 0.10 | - 2.0 | - 0.75 | -0.045 | - 0.030 | 18.0 20.0 | - | 8.0 10.5 | - |
View Complete details
Thickness | 3 inch |
Diameter | 12 mm |
Material | Stainless Steel |
Surface Finish | Polished |
Single Piece Length | less than 3 meter |
Usage/Application | Construction |
Material Grade | SS310 |
Country of Origin | Made in India |
We have realy stock of Grade 310, combining excellent high temperature properties with good ductility and weldability, is designed for high temperature service. It resists oxidation in continuous service at temperatures up to 1150°C provided reducing sulphur gases are not present. It is also used for intermittent service at temperatures up to 1040°C. Grade 310S (UNS S31008) is used when the application environment involves moist corrodents in a temperature range lower than that which is normally considered "high temperature" service. The lower carbon content of 310S does reduce its high temperature strength compared to 310. Like other austenitic grades these have excellent toughness, even down to cryogenic temperatures, although other grades are normally used in this environment. Grade 310L (and proprietary versions of this grade), is a 0.03% maximum carbon version of 310, sometimes used for very specific corrosive environments, such as urea production. | |||||||||||||||||||||||||||||||||
Key Properties | |||||||||||||||||||||||||||||||||
These properties are specified for flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications. Composition Typical compositional ranges for grade 310 stainless steels are given in table 1. Table 1. Composition ranges for 310 grade stainless steel
|
View Complete details
Grade | 304 L |
Length | 6 m |
Shape | Square |
Usage/Application | Construction |
Finish | Bright |
Country of Origin | Made in India |
We have gained rich industry experience in the field of supplying a huge gamut of 304L SS SQUARE Bar. Available in different sizes, shapes, finishes and dimensions, all our products require less maintenance and are ideal for high temperature & pressure applications. We have made our exclusive range of these caps by making use of world-class raw materials and sophisticated technologies.Grade 304 is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.
Key Properties
These properties are specified for flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.
Composition
Typical compositional ranges for grade 304 stainless steels are given in table 1.
Table 1. Composition ranges for 304 grade stainless steel
Grade | C | Mn | Si | P |
| Cr | Mo | Ni | N | |
304 | min. max. | - 0.08 | - 2.0 | - 0.75 | - 0.045 | - 0.030 | 18.0 20.0 | - | 8.0 10.5 | - 0.10 |
304L | min. max. | - 0.030 | - 2.0 | - 0.75 | - 0.045 | - 0.030 | 18.0 20.0 | - | 8.0 12.0 | - 0.10 |
View Complete details
Grade | 202 |
Length | 6 m |
Shape | Square |
Usage/Application | Industrial |
Finish | Bright |
Surface Treatment | Annealed |
Country of Origin | Made in India |
We have really stock of OF Stainless Steel Square Bar.
Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. Grade 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). Grade 316H, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316Ti.
The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.
Composition
Table 1. Composition ranges for 316 grade of stainless steels.
Grade |
| C | Mn | Si | P |
| Cr | Mo | Ni | N |
316 | Min | - | - | - | 0 | - | 16.0 | 2.00 | 10.0 | - |
Max | 0.08 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 | |
316L | Min | - | - | - | - | - | 16.0 | 2.00 | 10.0 | - |
Max | 0.03 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 |
View Complete details
Material | Alloy Steel |
Thickness | 12 mm |
Usage/Application | Construction |
Shape | Flat |
Single Piece Lengh | 6 meter |
Technique | Cold Rolled |
Surface Treatment | Powder Coated |
Model Name/Number | EN24 |
Product Details:
Thickness | 3mm-60mm |
Width | 15mm-150mm |
Length | 4-9m (Can be customised) |
Standard | AISI, ASTM, GB, JIS |
We are the leading supplier of the EN8 Flat Bar , having good strength and durability.
View Complete details
View Complete details
View Complete details
View Complete details
View Complete details
We are En9 Round Bars Trader in Mumbai, En9 Round Bars Supplier in Mumbai, En9 Round Bars Exporter in Mumbai, En9 Round Bars Dealer in Mumbai, En9 Round Bars Stockist in Mumbai, and En9 Round Bars Stockholder in Mumbai.Holding vast expertise in this domain, offering a collective range of En9 Round Bars to our treasured clients. Our offered product range are manufactured using by premium quality of material. These product range can be availed from us at industry competitive price.
Features:
Corrosion resistance
Effective price
High qualityView Complete details
We Export D2 Round Bar,We are the main and elite Manufacturer and Supplier of D2 Round Bar. We are famous for our quality and lowest possible rates. Our brilliant engineers manufacture this assortment with the help of modern technology and modern machines. Our quality controllers keep the production process under control. The offered range is available at cost effective rates.
Features:
Durable
Quality assured
Economical
Rust proof
Stainless
View Complete details
Minimum Order Quantity | 500 Kilogram |
Thickness/Diameter | 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch, TILL 150 MM DIAMETER |
Brand | IMPORTED JAPAN MAKE |
Material Grade | 410 grade |
Application | Manufacturing |
Single Piece Length | 6 meter |
Weight% | C | Si | Mn | P | S | Cr | Fe |
Alloy 410 | 0.15 max | 1.0 max | 1.0 max | 0.040 max | 0.030 max | 11.5-13.5 | Bal |
Material | Tempering Temp °C (°F) | 0.2 % Yield Strength (Mpa) | Ultimate Tensile Strength (Mpa) | % Elongation in 2" | % Reduction of Area | Charpy V Notch Impact Strength (J) | Hardness Brinell |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs | 260 (500) | 1089 | 1331 | 17 | 62 | 76 | 401 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs | 317 (700) | 1069 | 1296 | 17 | 60 | 66 | 401 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs | 482 (900) | 1014 | 1303 | 18 | 58 | 38 | 401 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs | 538 (1000) | 917 | 965 | 19 | 62 | 33 | 285 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs | 593 (1100) | 724 | 827 | 20 | 63 | 52 | 248 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs | 649 (1200) | 634 | 731 | 21 | 65 | 119 | 223 |
View Complete details
We are En19 Round Bars Trader in Mumbai, En19 Round Bars Supplier in Mumbai, En19 Round Bars Exporter in Mumbai, En19 Round Bars Dealer in Mumbai, En19 Round Bars Stockist in Mumbai, and En19 Round Bars Stockholder in Mumbai.Holding vast expertise in this domain, offering a collective range of En19 Round Bars to our treasured clients. Our offered product range are manufactured using by premium quality of material. These product range can be availed from us at industry competitive price.
Features:
Corrosion resistance
Effective price
High qualityView Complete details
M42 High Speed SteelM42 high speed steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of M42 in round bar. This grade is a cobalt molybdenum high speed steel which achieves a high hardness and superior hot hardness. Excellent cutting performance can be achieved from tools made in M42 high speed steel. With the high heat treated hardness of up to 70 Rockwell M42 high speed steel also offers excellent wear resistance.
Related Specifications
AISI ASTM A681 DIN 17350 BS EN ISO 4957
Typical Analysis |
|
Form of Supply | West Yorkshire Steel are stockholders and suppliers of round bar. Diameters can be sawn to your required lengths as one offs or multiple cut pieces. Ground steel bar can be supplied, providing a high quality high speed steel precision ground bar to tight tolerances. |
Diameter |
M42 Tool Bits | M42 high speed steel tool bits are supplied in flats, squares and rounds. Commonly supplied in standards sizes though non standard metric and imperial sizes can be produced within a few weeks, subject to availability of suitable raw material. |
Applications | M42 high speed steel can be used in conditions where the demand for hot hardness is important. Commonly used for cutting tools including twist drills, taps, broaches tools, milling cutters, reamers, end mills, bandsaw blades, cold work tools. |
Forging | Pre heat the M42 high speed steel slowly and uniformly to 650-760°C and equalise. Then increase more quickly to the forging temperature of 1010-1150°C and equalise prior to forging. Do not allow the forging temperature to drop below 980°C, if this occurs re heating will be necessary. Always cool the high speed steel very slowly after forging. |
Annealing | Annealing of M42 is recommended after hot working and before re hardening. Heat the M42 high speed steel to 850°C at a rate of no more than 220°C per hour. Always hold at temperature for one hour per 25mm of thickness (with two hours being minimum). Furnace cool slowly. The M42 annealed hardness achieved should be 269 Brinell or lower. |
Stress Relieving | If tools produced from M42 high speed steel are heavily machined or ground it is recommended to stress relieve after machining and prior to hardening to minimise the possibility of distortion. To stress relieve heat the component to 600-650°C and soak well (approximately two hours) Cool slowly in the furnace. The M42 tools can be finish machined before heat treatment. |
View Complete details
Standard | : | AISI,ASTM,BS,DIN,GB,JIS |
Diameter | : | 10mm ~ 300mm |
Type | : | Flats, Round, Square, Forged. |
Grades | : | AISI M2 (DIN-1.3343) (IS-XT8W6Mo5Cr4V2) High Speed Steel Round Bar |
| ||||||||||
Types of M2 High Speed Steel Round Bars |
View Complete details
View Complete details
With the assistance of our adroit professionals, we are engaged in providing CS Round Bar. These Round Bars are offered by our professionals keeping in mind precise requirements of clients. Our adept professionals use cutting edge techniques and methodologies while manufacturing the offered range. Apart from this our valuable clients can avail the entire range from us in various sizes.
Features:
View Complete details
Product Details:
Bar Shape | Round |
Thickness | 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm, >5 mm |
Material Grade | C 45 |
We, Naresh Steel & Engineering Co. are the leading Dealer and Manufacture of C -45 Round Bar & Plate. We have verily won the trust of our esteemed clients owing to several noted attributes of our product array characterizing optimal in overall qualities, strength, light weight, efficiency and performance. We purvey full panoply of steel products to our clients in various countries across the globe.
Advantages:
High Tensile Strength.
Quality & Quantity Assurance with competitive prices.
Anti Corrosive surface finishing.
View Complete details
Product Details:
Material | Alloy Steel |
Shape | Round |
Diameter | 3-6 Inch |
Application | Manufacturing, Construction |
We, Naresh steel & Engineering Co. are the leading Dealer and Manufacture of Alloy Steel Round Bars. We have verily won the trust of our esteemed clients owing to several noted attributes of our product array characterizing optimal in overall qualities, strength, light weight, efficiency and performance. We purvey full panoply of steel products to our clients in various countries across the globe.
Advantages:
· High Tensile Strength.
· Quality & Quantity Assurance with competitive prices.
· Anti Corrosive surface finishing.
· Precisely Engineered.
View Complete details
Product Details:
Single Piece Length | 3 meter, 6 meter |
Usage | Manufacturing, Construction |
We, Naresh Steel & Engineering Co. are the leading Dealer and Manufacture of Mild Steel Round Bar. We have verily won the trust of our esteemed clients owing to several noted attributes of our product array characterizing optimal in overall qualities, strength, light weight, efficiency and performance. We purvey full panoply of steel products to our clients in various countries across the globe.
Advantages:
· High Tensile Strength.
· Quality & Quantity Assurance with competitive prices.
· Anti Corrosive surface finishing.
· Precisely Engineered.
View Complete details
Product Details:
Thickness/Diameter | 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch |
Application | Manufacturing, Construction |
Single Piece Length | 3 meter, 6 meter |
Made available by us is a vast array of En 31 Round Bar for respectable customers. Manufactured using high quality mild steel, all these round bars are in compliance with international quality standards. To cater to the diverse requirements of valued customers, we offer these bars in a spectrum of specifications at reasonable rates.
Features:
· Dimensionally accurate
· Durable
· Rust proof
View Complete details
We are listed at the acme for supplying and trading of premium quality Stainless Steel 304L Hexagonal Bar. The offered product is highly popular for its long lasting life and flawless finish. Extensively used in power and petroleum industries, the entire range of high quality hexagonal bars offered by us is highly demanded in the market. Our offered product is customized as per client's requirements.
use in food industries,chemical industries , electrielcal industries, genrater industries, shaft industries, cement industries, gais industries power project
CHEMICAL..
UNS NO | Grade | C | Si | Mn | P | S | Cr | Mo | Ni | N |
S30403 | 304L | 0.030 | 0.75 | 2.00 | 0.045 | 0.030 | 18.00/20.00 | - |
View Complete details
Applications:
View Complete details
316L Stainless Steel Round Bar
The 316L stainless steel grade has less carbon than 316 stainless steel, offering better corrosion resistance after welding or stress relieving. It is a common choice when the material cannot be annealed after it has been welded. An austenitic stainless steel, 316L is typically...
Stainless Steel 316L Round Bar,Stainless Steel 316 Round Bar,Stainless Steel 304L Round Bar
use in food industries,chemical industries , electrielcal industries, genrater industries, shaft industries, cement industries, gais industries power project
View Complete details
With wide years of expertise and know-how in this arena, we have carved a unique niche in the nation by offering a comprehensive array of 304L Stainless Steel Round Bar. Designed and manufactured with accuracy, these offered bars are highly recommended and praised. Together with this, owing to their durability, resistance against corrosion and longer life, these are highly acclaimed.
chemical Comp.. Wt. % c-Max 0.08 Cr-18 - 20 Fe-66.345 - 74 Mn-Max 2 Ni-8 - 10.5 P-Max 0.045 S-M0.03 Si-Max 1
Features:
* Highly reliable
* Rugged construction
* Durable nature
use in food industries,chemical industries , electrielcal industries, genrater industries, shaft industries, cement industries, gais industries power project
use for shaft
use for bearing
use for ship
View Complete details
Wire Thickness | From 0.3 mm to 8 mm | Coil form |
Wire Rod thickness | From 8 mm to 20 mm | Upto 6000 mm long |
Round Bar (dia) | From 20 dia to 600 dia | Upto 6000 mm |
Forms | Available in Round, Square, Hexagon form | Available in black and bright both |
View Complete details
Specifications:
Size Range: Dia 5MM To 500 MM Length 500 MM to 6000 MM.
Stainless Steel: ASTM / ASME SA 276 TP 202, 304, 304L, 309S, 309H, 310S, 316, 316L, 316 TI, 317,321, 347, 410, 420, 430, 431, 440A ,B C., 446, 17-4 PH.
Duplex Steel: ASTM / ASME SA 276 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Carbon Steel: ASTM / ASME A 105.
Alloy Steel: ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91,ASTM / ASME A 729 GR B 11 B 22.
Nickel Alloy : ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ),ASTM / ASME SB 164 UNS 4400 (MONEL 400),ASTM / ASME SB 425 UNS 8825 (INCONEL 825), ASTM / ASME SB 446UNS 6625 (INCONEL 625), ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 ), ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 ).
High Speed Steel (HSS):M2, M3, MJ5, M42. T-1. T-4, T-15, T-42, D2. D3, H11, H13, OHNS-01 EN52,HCHCR OHNS in Grade.
Other Grade: Aluminium, Phosphorus Bronze, Gun Metal, Lead, EN Series Etc.
Finish: Bright, Polish Black.
Form: Round. Square, Hex (A/F), Bush, Rectangle, Flat, Block, Billet, Ingot Etc.
Hardness: Soft, Hard, Half Hard, Quarter Hard etc.
Test Certificate: Mtc, Ibr Tc, Lab, Tc from Govt. App. Lab, with Third Party inspection.
Specialize:304, 316, *17- 4PH, Copper E/c Grade.
View Complete details